Every Drop of Water Counts

Residential water use increases 40 to 50% during summer months due to outdoor water use. Stormwater runoff is the leading type of residential non-point source pollution.

What is a Rain Barrel?
A rain barrel collects and stores rainwater from rooftops to use later for lawn and garden watering. Water collected in a rain barrel would normally pour off your roof directly or flow through roof gutter downspouts and become stormwater runoff. Depending on your yard, this runoff can travel onto paved surfaces and eventually into a storm drain.

Why Use Rain Barrels?
• Rain barrels conserve water and help lower costs (a rain barrel can save approximately 1,300 gallons of water during peak summer months).
• Rain barrels reduce water pollution by reducing stormwater runoff, which can contain pollutants like sediment, oil, grease, bacteria and nutrients.
• Rain barrels are inexpensive and easy to build and install.

A rain barrel can be used to save water for plants during dry periods. Rain barrels can also be arranged to slowly release the collected rain fall to areas that can soak up the water, reducing stormwater runoff and increasing groundwater recharge.

Operation and Maintenance
Rain barrels should be drained and removed for the winter months to prevent ice damage. It is recommended that you remove the existing downspout and elbow intact and store for reinstallation in the late fall. You can then add another downspout section that will need to be custom cut to an appropriate height above your rain barrel. Two, connected downspout elbows (forming an S shape) or hinged extension should sit about two inches above the rain barrel inlet hole. Fine mesh screen should be used to cover any openings in the rain barrel to prevent mosquitoes and to trap debris. Rain barrels can be installed upon blocks or wooden crate to provide height for gravity flow purposes.